NCL Alltimate

prod Image
PRODUCT DESCRIPTION

NCL Alltimate is a premium and pure acrylic paint specially formulated to give excellent ultrasmooth surface finish. The specially chosen raw materials for making NCL Alltimate paint imparts durability, smoothness, high surface adhesion, and beauty to the surface.

The surface protecting agents in NCL Alltimate offers good protection against common fungi and algae. All the precautions of paint surface preparation are to be strictly followed before applying NCL Alltimate paint.

NCL Alltimate paint is applied with a smooth brush and roller over exterior cement plastered and exterior cement primed surfaces in two coats.

prod Image
ADVANTAGES
  • Ease of application with paint brush / Roller
  • Long-lasting durability
  • Glossy finish
  • High adhesion strength
  • Water-resistant
  • UV-resistant
  • Fungus & Algae-resistant
  • Eco friendly and very low VOC
  • Available in a range of attractive colours
prod Image
APPLICATION AREAS
Exterior application on Cement Plasters and Concrete primed dry surfaces
prod Image
PACK SIZES
20/10/4/1 litre pails
prod Image
TECHNICAL DATA
Sl. No. Attributes Standard NCL Buildtek Conforms
1 Colour Mfg. Spec Range of colors
2 pH Mfg. Spec 7 to 8.5
3 Weight / litre - g / cc Mfg. Spec 1.28 to 1.3
4 Application temperature Mfg. Spec 10°c to 40°c
5 Touch dry at 30°C Mfg. Spec < 15 minutes
6 Number of coats Mfg. Spec 2
7 Time gap between coats Mfg. Spec 4 hours
8 Toxicity Mfg. Spec Non toxic
prod Image
SURFACE PREPARATION
  • Ensure that the wall’s surface is free from dust, oil, grease, paints, loose foreign particles/ materials and curing agents which may otherwise affect adhesion
  • Fill the cavities on the wall
prod Image
MIXING & APPLICATION
For 1st Coat :
  • Transfer the complete 1 litre paint material into a clean tub / bucket
  • Add 1 litre water to 1 litre paint and mix thoroughly
  • The above diluted material should be free from lumps
  • Apply the material on the primed dry surface using a quality paint brush followed by a roller
  • Leave it to dry for a minimum of 4 hours
  • Consume / apply the above mixed material within 12 hours
For 2nd Coat :
  • Transfer the complete 1 litre paint material into a clean tub / bucket
  • Add 500 ml water to 1 litre paint and mix thoroughly
  • The above liquid should be free from lumps
  • Apply the material on 1st coat dried surface using a quality paint brush followed by a roller
  • Leave it for a minimum of 8 hours to dry to develop the actual required colour
  • Consume/ apply the mixed material within 12 hours
prod Image
COVERAGE
The coverage is 80 sft / litre per 2 coats. The coverage may vary depending upon the condition of the substrate
prod Image
SHELF LIFE
6 months
prod Image
STORAGE
Store in moisture-free dry place
prod Image
PRECAUTIONS
  • Keep out of reach of children
  • Keep in a dry place
  • Avoid inhalation of dust
  • If it comes in contact with eyes or you feel skin irritation, wash with plenty of water and consult a doctor
Marketed by:
NCL Buildtek Ltd.,
10-3-162, 5th Floor, NCL Pearl,
SD Road, East Maredpally,
Secunderabad - 500 026.
Ph: +91 40 6831 3333
e-mail: contactus@nclbuildtek.com
Website: www.nclbuildtek.com
Preloader image