PRODUCT DESCRIPTION

NCL Dazylite, apart from excellent surface adhesion, also offers flexibility and better tolerance to normal thermal movement, thus protecting the surface against hairline cracks. NCL Dazylite is made with specially chosen raw materials and the selectively sieved fine fillers offer smoothness and surface coverage. Added to this, the film-protective agents used, make the surface resistant to algae and fungal growth.

Where texture surface is the requirement, a single coat of NCL Deco Base offering scratch finish in small/ big/ jumbo/ super jumbo lines may be applied, over which, NCL exterior cement primer and NCL Dazylite paint can be applied as a finishing coat.

ADVANTAGES

• Ease of application with paint brush / Roller
• Long-lasting durability
• High glossy finish
• Excellent adhesion strength
• Water-resistant
• Hides hair line cracks
• UV-resistant
• Fungus & Algae-resistant
• Eco friendly and very low VOC
• Available in a wide range of attractive colours

SURFACE PREPARATION

• Ensure that the wall’s surface is free from dust, oil, grease, paints, loose foreign particles/ materials and curing agents which may otherwise affect adhesion
• Fill the cavities on the wall

MIXING & APPLICATION

• Transfer the complete 1 litre paint material into a clean tub / bucket
• Add 1 litre water to 1 litre paint and mix thoroughly
• The above diluted material should be free from lumps
• Apply the material on the primed dry surface using a quality paint brush followed by a roller (NCL Dazylite, for better results, especially on building elevations, it is advised to follow the application sequence after good surface preparation – NCL key coat/ NCL under coat/ putty-like White Cement Putty or NCL exterior superfine (acrylic based) where smoothness and better flexibility is required may be applied in 2 coats
• Leave it to dry for a minimum of 4 hours
• Consume / apply the above mixed material within 12 hours

• Transfer the complete 1 litre paint material into a clean tub / bucket
• Add 500 ml water to 1 litre paint & mix thoroughly
• The above liquid should be free from lumps
• Apply the material on 1st coat dried surface using a quality paint brush followed by a roller
• Leave it for a minimum of 8 hours to dry to develop the actual required colour
• Consume/ apply the above mixed material within 12 hours

PRECAUTIONS

• Keep out of reach of children
• Keep in a dry place
• Avoid inhalation of dust
• If it comes in contact with eyes or you feel skin irritation, wash with plenty of water and consult a doctor