NCL Harmony

prod Image
PRODUCT DESCRIPTION

NCL Harmony is an exterior grade emulsion paint specially formulated to give smooth exterior wall paint matt finish. NCL Harmony is made of inorganic fillers, additives, acrylic polymers etc. It has good adhesion to the substrate. NCL Harmony paint is applied in two coats over cement plastered primed exterior surfaces.

prod Image
ADVANTAGES
  • Ease of application with paint brush / roller
  • Long-lasting durability
  • Matt finish
  • Good adhesion strength
  • Water-resistant
  • UV-resistant
  • Fungus & Algae-resistant
  • Cost effective
  • Eco-friendly and very low VOC
  • Available in a range of attractive colours
prod Image
APPLICATION AREAS
Suitable for exterior applications on cement plasters and concrete
prod Image
PACK SIZES
20/10/4/1 litre pails
prod Image
TECHNICAL DATA
Sl. No. Attributes Standard NCL Buildtek Conforms
1 Colour Mfg. Spec Range of colors
2 pH Mfg. Spec 7 to 8.5
3 Weight / litre - g / cc Mfg. Spec 1.35
4 Application temperature Mfg. Spec 10°c to 40°c
5 Touch dry at 30°C Mfg. Spec < 15 minutes
6 Number of coats Mfg. Spec 2
7 Time gap between coats Mfg. Spec 4 hours
8 Toxicity Mfg. Spec Non toxic
prod Image
SURFACE PREPARATION
  • Ensure that the wall’s surface is free from dust, oil, grease, paints, loose foreign particles / materials and curing agents which may otherwise affect adhesion
  • Fill the cavities on the wall
prod Image
MIXING & APPLICATION
For 1st Coat :
  • Transfer the complete 1 litre paint material into a clean tub / bucket
  • Add 500 ml water to 1 litre paint and mix thoroughly
  • The above diluted material should be free from lumps
  • Apply the material on primed dry surface with a quality paint brush followed by a roller
  • Leave it for a minimum of 4 hours to dry
  • Consume / apply the above mixed material within 12 hours
For 2nd Coat :
  • Transfer the complete 1 litre paint material into a clean tub / bucket
  • Add 500 ml water to 1 litre paint and mix thoroughly
  • The above liquid should be free from lumps
  • Apply the material on 1st coat dried surface with a quality paint brush followed by a roller
  • Leave it for minimum of 8 hours to dry and develop the actual required colour
  • Consume / apply the above mixed material within 12 hours
prod Image
COVERAGE
The coverage is 50-80 sft per litre per 2 coats. The coverage may vary depending upon the condition of the substrate
prod Image
SHELF LIFE
6 months
prod Image
STORAGE
Store in a moisture-free dry place
prod Image
PRECAUTIONS
  • Keep out of reach of children
  • Keep in dry place
  • Avoid inhalation of dust
  • If it comes in contact with eyes or feeling of skin irritation, wash with plenty of plain water and consult a doctor
Marketed by:
NCL Buildtek Ltd.,
10-3-162, 5th Floor, NCL Pearl,
SD Road, East Maredpally,
Secunderabad - 500 026.
Ph: +91 40 6831 3333
e-mail: contactus@nclbuildtek.com
Website: www.nclbuildtek.com
Preloader image