NCL Optima

prod Image
PRODUCT DESCRIPTION

NCL Optima is an economical exterior emulsion paint. It is specially formulated with special pigments, inorganic fillers, acrylic binders, additives etc. to give a smooth exterior finish. It is available in eye pleasing colors and is suitable for brush, roller and spray applications.

Two coats of NCL Optima are to be applied over cement plastered primed exterior walls. Roller application of 2nd coat will give a rich look. 3 coats are recommended for parapets, lintels and other horizontal surfaces.

prod Image
ADVANTAGES
  • Ease of application with paint brush / roller
  • Long-lasting durability
  • Matt finish
  • Good adhesion strength
  • Water-resistant
  • UV-resistant
  • Fungus & Algae-resistant
  • Cost-effective
  • Eco-friendly and very low VOC
  • Available in a range of attractive colours
prod Image
APPLICATION AREAS
  • Suitable for exterior applications on cement plaster primed surface
  • Recommended for parapets & Lintels
prod Image
PACK SIZES
20/10/4/1 litre pails
prod Image
TECHNICAL DATA
Sl. No. Attributes Standard NCL Buildtek Conforms
1 Colour Mfg. Spec Range of colors
2 pH Mfg. Spec 7 to 8
3 Weight / litre - g / cc Mfg. Spec 1.42 to 1.44
4 Application temperature Mfg. Spec 10°c to 40°c
5 Touch dry at 30°C Mfg. Spec < 20 minutes
6 Number of coats Mfg. Spec 2
7 Time gap between coats Mfg. Spec 6 hours
8 Toxicity Mfg. Spec Non toxic
prod Image
SURFACE PREPARATION
  • Ensure that the wall’s surface is free from dust, oil, grease, paints, loose foreign particles / materials and curing agents which may otherwise affect adhesion
  • Fill the cavities on the wall
prod Image
MIXING & APPLICATION
For 1st Coat :
  • Transfer the complete 1 litre paint material into a clean tub / bucket
  • Add 1 litre water to 1 litre paint and mix thoroughly
  • The above diluted material should be free from lumps
  • Apply the material on primed dry surface with a quality paint brush followed by a roller
  • Leave it for a minimum of 4 hours to dry
  • Consume / apply the above mixed material within 12 hours
For 2nd Coat :
  • Transfer the complete 1 litre paint material into a clean tub / bucket
  • Add 600 ml water to 1 litre paint and mix thoroughly
  • The above liquid should be free from lumps
  • Apply the material on 1st coat dried surface with a quality paint brush followed by a roller
  • Leave it for minimum of 8 hours to dry to develop the actual required colour
  • Consume / apply the above mixed material within 12 hours
prod Image
COVERAGE
The coverage is 60 - 80 sft/ litre per 2 coats. The coverage may vary depending upon the condition of the substrate
prod Image
SHELF LIFE
6 months
prod Image
STORAGE
Store in a moisture-free dry place
prod Image
PRECAUTIONS
  • Keep out of reach of children
  • Keep in a dry place
  • Avoid inhalation of dust
  • If it comes in contact with eyes or feeling of skin irritation, wash with plenty of plain water and consult a doctor
Marketed by:
NCL Buildtek Ltd.,
10-3-162, 5th Floor, NCL Pearl,
SD Road, East Maredpally,
Secunderabad - 500 026.
Ph: +91 40 6831 3333
e-mail: contactus@nclbuildtek.com
Website: www.nclbuildtek.com
Preloader image